Separate names with a comma.
Whilst moving just the tensioner pulley will keep the timing the same, altering both by fitting a larger idler pulley will increase the amount of...
Should be shorter, by a couple of teeth I think...
If you could use the bigger pulley on both the idler and tensioner then I guess the belt would still be 'central'? Not sure if you'd get the belt...
Only potential problem is that the load goes through the crankshaft and crankshaft breakages are not unheard of, particulary Testastretta...
Or even just the 2 valves if really lucky? My Son's car cambelt broke last year, it took out the exhaust valves but the intakes were untouched.
Here's my 916 before the skim work, so a standard 916; [IMG] Not a super close up pic but you can see a decent gap. Here it is as is now with...
Yes, 100% I took the dished plates out, initially as an experiment and when all was OK I ditched them completely. I have quite a selection of...
Maybe more beneficial in a slipper?...
No, using a larger pulley on one side only will slightly move (advance?) the belt position and so affect the cam timing - not sure by how much...
No graunching and clutch engages/disengages fine as it is, but surely a dished plate won't flex enough to completely flatten so not all the plate...
No, the bigger radius makes the run further on the roller and the pulley needs to sit further back to compensate. It does make them tighter to get...
Surely changing the frame no. will change the identity of the bike? with the bike taking the reg. no. & identity of the replacement frame? AFAIK...
I use a mixture of 1.5 and 2mm plain plates to reduce the pack thickness to under 38mm, otherwise get drag and selecting neutral is tricky. I...
And those gold (996) idler pulleys are a couple of mm bigger than the black (916), so give better distancing. They're what I used on my 916 to...
I was long sceptical of the phone app setting thinking that it might be too variable but, for the first time this year tried it out. I set the...
I had my heads skimmed 1mm, plus reduced the base slightly to get the squish. I fitted the larger (gold coloured) idler pulleys to compensate,...
