Separate names with a comma.
I completely agree. Good you have it back where it should be.
You folk are really making a mountain out of a mole hill. It's simple; Remove the belt covers. Remove the plugs so the engine turns over...
I reckon they should fail on any of the above points
Excellent result.
The spacers are at the top of the strut where it attaches to the frame plate.
Here is one for a 2012 Pikes Peak. Should be same and has the same spacers. [ATTACH] As do the 2013 models. [ATTACH] [ATTACH] [ATTACH]
I have no idea what they look like but there are 2 spacers at the suspension top mount that might be around that size. Items 8 in this picture...
I haven't got a centre stand so can't comment on that but there is no interference problem between the brake lever and the switch bracket,...
Flatten it back with 1200 wet & dry then polish it very lightly with T-cut. Don't overdo the polishing or it will end up gloss again.
Not that I've ever noticed. It shouldn't affect their operation anyway and will probably clear when the weather warms up.
Lucazade has been having a similar problem with a 695 Monster that I've been trying to help him with. It's not quite straightforward....
I think the main issues have been the captive nuts spinning when attempting to unscrew the retaining screws for the tank cover. Some seem to think...
I was pissed off with the stainless on my full Termi system turning rusty all the time. Last winter I spent the best part of 3 days polishing it....
Yes, ethanol in fuel will absorb water - but 1/2 a gallon!!
Do the tanks have floating pickup system then, that ensures fuel is drawn off at or near the surface so that there is no chance of contaminants...
Hard to start! I wouldn't think it would run at all. Sounds more like it got in with the fuel. I once got a jam jar of water in my tank after a...
Check the drain at the filler cap surround. It is most likely blocked and rain and water from washing the bike will find it's way into the tank...
The additional pin on the 3 wire relay is usually for a warning lamp. The teminals are usually marked X, L and P X is the +12v. L is to the...
Both sides may not go to the same earth point. The relay is upstream of the switch and should only have 2 connections, none which are earth. It...
Sticking button?
