Separate names with a comma.
I've used them on the ST4s with much the same experience. I was very disappointed by how quickly they wore out.
A friend in Germany is thinking of buying some part from www.ducatipaddy.com Anyone know anything about them?
Inability to select neutral is invariably due to the clutch dragging. It may be because of reduced lift by the Oberon slave cylinder but I doubt...
I got a new numberplate with a Euro GB symbol and cut a piece of 1.5mm aluminium to fit behind it. I think that should cure the melting plate.
They were the 'Outlast' ones.
A couple of years ago I bought Wolf Titanium textile jacket and trousers. They looked good, but later that year I came off the bike and wore a...
When I got my 2010 last November the clutch adjuster was seized and the brake one was stiff to turn. Trying to turn it with pliers was just going...
And the TPS needs setting.
They've obviously taken it into account on the manual for the later bikes, although I think 3 years is a bit long. It will be fun, not to mention...
The fuel filter on my ST4s and various previous Ducatis from the Desmoquattro and Testastretta eras was specified for changing every 12,000 miles...
Many Ducati front discs, including the ones that were on my ST4s, have a groove around them. I don't know what for, maybe something to help...
I've always understood that all antifreeze solutions contain a corrosion inhibitors these days. Perhaps some are more effective than others.
None at all. I did 350 miles through the Scottish Highlands yesterday and didn't even notice it.
The nipple on the rear brake banjo just fouled the seat base on mine. I simply drilled a 10 mm hole at the point of contact to clear the nipple.
I guess I'll knock the average up a bit. I'm 63 and have been riding bikes since I was 16 and Ducatis since 1976. I bought an 860GTS then, the...
From looking at the wiring diagram the OEM suspension computer is only powered when the ignition is on, since it uses the same connector the...
I fitted the bleed nipple banjos to the ABS block on both front and rear circuits yesterday and then bled them. Some air came out as I expected as...
I have a full Termi with no cat and the rear brake is still crap, hot or cold. :mad: Bleeding made no difference. It is absolutely impossible to...
Perhaps, but how many miles did it do in these 10 years? Shims don't degrade with age.
Does anyone know the diameter of the rear master cylinder? I've been considering the possibility of replacing it with one that has a larger...
