Separate names with a comma.
They are a standard M10 x 1mm thread banjo. I just ordered a pair off eBay.
A couple of months ago I tried bleeding my rear brake at the ABS block by loosening the banjo ( with a rag wrapped round them), pushing the pedal...
They don't sound like any other Ducati I've heard Dave. I'd wondered if they'd sound like a bevel but they don't. The cam timings are quite...
I worked with Macs from the late eighties until I got an early retirement deal 2 years ago. First thing I bought with my retirement cash was a new...
It wasn't cheap but the silencers were a good price and there are no new cans of any sort available in the UK for the Paso series. The ones that...
28,367 miles. I bought it off a Ducatisti member a couple of years ago. I've put about 2,000 on it since then. It now runs ST2 barrels, pistons...
The Contis I got off eBay from Gowanloch in Australia eventually arrived today. Look good on the bike; [ATTACH] [ATTACH] Sound good too...
No, as long as the belts do get changed and you are confident to do then yourself. The lack of maintenance/servicing should be a good reason to...
I think your n/s led flasher is faulty. When you tried the o/s one you probably had the connections reversed and LEDs don't work with reversed...
Running without covers might not be so clever if a stone gets in.
I was going to fit a pair last week but the rear 190/55 size isn't available in the UK right now, so I've just gone for PR3s again.
The part nos. are available in the downloadable parts list from Ducati.com RH panel : 69916571A, LH panel : 69916581A
I posted about this in the ST section recently. Oil pressure sensor is same as Vauxhall Agila/Meriva. Coolant sensor is same as 1.2 8V fiat Punto.
I did the quiet clutch mod at about 5,000 miles on my ST4s. The original pack lasted 38,000 miles and the basket and drum had barely a mark on...
Good to hear you got it sorted :upyeah:
Best to get it checked out. It may be coolant from a leaking head gasket or a porous head casting but is more likely leakage from the hose from...
You should be able to clean that up using one of these. Once you have the board cleaned up and any joints re-soldered it's a good idea to lacquer...
PM sent.
Recently I rode to Glasgow and back on a tankful. A 191 mile round trip. The LCD said I had 7 miles of fuel left, the tank took 19 litres! So the...
I found the post I was referring to. You can see it here. It's reckoned it has something to do with the gearchange. The screw is also fitted to...
