Separate names with a comma.
Yes, that's the obvious one. I should have thought of that myself :rolleyes:
If there is something under one of the bearings preventing it seating properly it will be subject to an axial load when you tighten the spindle...
That's the message I was getting when the front ABS sensor was disconnecting but the ABS light was staying lit up too....
Mine too.!!
If the bike sat for 4 years it's possibly from codensation .
I just replaced the bulging capacitor in my DVD player PSU with one I had in a box spares. It is working perfectly again. Cost nothing. Result :)
There are two O2 sensors, one in each header before the cat. There in sensor after the cat.
The Dan Moto mid pipe has no baffles nor silencing in it, neither does the original end can. Together they will be helluva loud.
Just a thought. Since the Mitsubishi ECU is fitted to the Diavel and Panigale and most probably on the new Hyperstrada and 2013 Hypermotard would...
I have to agree, mine is a real one and hasn't got those chrome covers on the sides :rolleyes:
The Stebel Nautilus Compact is what you need. I have one on my MTS that I previously had on my ST4s. It is F'ing LOUD. It needs a relay though. I...
Just about every piece of electronic equipment uses switch mode power supplies these days as they require no large transformer so are cheaper to...
It's the tyre that's out of true. It may not be seated on the rim correctly. There is a line on the sidewall that should be equidistant, about...
No, it's a changeover relay.
There are a couple of articles about changing the bars on AndyW's motorcycleinfo website; Motorcycle Info Pages - MTS1200 DIY Mods > MTS1200...
I agree, I too want the with a more backward sweep. Using the risers allowed the bars to be rotated backwards to achieve this to some extent....
It certainly appears to be an issue with either the supply or earth to the ECU. Check the ECU earth cable which is attached to one of it's...
The only thing that can affect only one cylinder is the ECU. Both coils are supplied by the fuel pump relay which is turned on the by the ECU, so...
The answer is YES. See this thread. I've fitted risers as suggested in order to rotate the bars back for a better angle without the controls...
If this is a common failure it ought to be subject to a recall.
