Separate names with a comma.
I no longer have the ST4s but one of the first mods I did was to fit HID to the dip beam. The pattern was still rubbish but at least it was...
I have 2 other diagrams that may help. One is for a 239/250D where the Ducati self-generating ignition has been replaced with the Electrex set up....
Sorry, I misunderstood what you were looking for. There is a wiring diagram on Bevelheaven but it's not great and the legend is in French. I have...
If the electric handsfree lock was in use it would unlock when the dash switched on after entering the pin code, so no need to break the steering...
Elextrex do a complete 12V system for the wide case engines with stator, rotor and regulator. It might save you a lot of hassle. The also do...
Sports classic wheels can be fitted but you need to get a bit machined off the inside of the front calipers to clear the spokes.
By linking certain circuits, available at the fuse box, it's definitely possible to turn on the dash. Whether this would enable an engine start I...
They are known as "Fuji" nuts. Aerotite used in the aircraft industry will do as suitable replacements but you can get them from a Ducati dealer.
You'll have to wait a while before I can find out. Before you posted that link for an ELM327 bluetooth adaptor I'd gone and ordered one from...
It should do as long as it has a Marelli ECU. I think only the 1100 Evo uses a Seimens ECU.
Thanks for the link Chris. I've downloaded this and also the Scan Mx5 Tests, Monitor and Trimmer apps. I already have the Fiat adaptor so I just...
According to Ian Fallon, there were 2,481 400SS models made. 285 went to Europe, mainly Italy, 20 went to Australia and all the rest went to...
No. When the crank sensor fails the tacho stops, but so does the sparks, injectors and fuel pump.
In case anyone didn't notice. Since selling my ST4s I have a bar riser system for sale on the classified section
Since the new owner of my ST4s has decided not to purchase the bar riser system which I had had on the bike it is now for sale. It consists of a...
In terms of servicing the only difference between the 2V DS engine and the 4V ST4/ST4s is the cost of the belts - about £20 more for the 4V. I...
The chain and sprockets on my recently purchased MTS were replaced at the 15,000 mile service. From experience with my previous bikes, chains...
Me too but I didn't find it easy to take the cable off. I found that by removing the bottom subframe fixing bolts and loosening the top ones I...
If they are the same as the ones on my ST4s and previous 900ss then they are 32mm, any deep socket should do. Just remember to loosen the pinch...
I think what was supplied as DP items depended on what was available at the time so there could be a few variations. DP exhausts are usually...