Separate names with a comma.
I have a set of OEM cans in the attic although I haven't gone up to look at them I'm fairly confident that what you have is not the original...
No, the 1098 forks have radial brakes.
The ?? one with the cutaway is the same as the one on my ST4s, also fits my 907. It should also fit any of the 3-phase cases from the early 2000s....
I have found 7 different part numbers; 701.4.001.1A : Paso 906. 907ie, Carb 900SS, M900, 916, 748 etc. Basically all the single phase alternator...
30mm
Yes, I used to do that too.
Sorry John, I was thinking of AndyW who has some connection with it.
Fuel lights are notoriously inaccurate. Zero the trip every time you fill up. Then the next time you fill up you will know how much fuel you have...
Any news on the 'DUC-911' software? Is it likely to happen soon?
I've been using an M* bolt with a locknut for years but this Christmas I got a Laser engine turning tool as a present. :smile: It has the...
I haven't got a photo but as far as I can tell the later master cylinder has the hose barb to the reservoir at about 45 deg to the cylinder where...
Finally got mine fitted today after leaving the washers off the inboard screws. They look good on the bike but it could be a good few weeks before...
Thanks Bob.
I spent about 90 minutes at them today and got nowhere. Like you I can't get the inner screws to line up. I can get the screws to thread without...
I doubt if it's the sensor or the engine would be running too rich. If you connect a switch to pin 85 of the relay ( the grey/black wire) to...
The fan should come on before 220F. There are 2 temperature sensors; the one on the horizontal cylinder is for the LCD readout, the one on the...
Well I got it off. The only real way was to remove the voltage regulator and pivot the rear subframe upwards on the upper bolts to create enough...
Thanks for the info Boomer. Yes, I just want to get the cable out of the way for tidiness. Looks like I will have an interesting day tomorrow :-(
Thanks Neil. I'll have a look tomorrow when I'm feeling fresh for another go. :upyeah:
I am fitting the Termi full system that came with my bike. So far I have fitted the race ECU and removed the stock exhaust. Before fitting the...