Separate names with a comma.
The give away sign on mine was that the spring retainer was rubbing on the inside of the clutch cover yet the nut was tight. I replaced the hub...
I've got M4 Monobloc (cast) calipers on the Monster and HPK (billet) on the 916 and both work great, obviously bikes are a little different but...
Gear selector spring?
Or screw in a bolt with locknut and use a spanner/socket.
Lights/wiring are the same, the latch plate is different though so unless you fit a mono subframe then you'll need to adapt the latch to work with...
Unfortunately as they got older and less abundant the prices of parts get more expensive. When I wanted to convert my 916BP to Mono, I bought a...
If you are replacing the chain/sprockets completely then stick with a 15t front and fit a larger rear - 39t or 41t. I run a 15/39 on a 916 (was...
Fairly sure you don't need any special tools to remove the steerer tube? The easiest head bearings you'll ever change as the bearings are in the...
Unplug the jukebox? [IMG] A well known authority on MOTs...
You can have more than 2 to an email. I've set it up for 7 vehicles (3 bikes & 4 cars) to the same email...
Part no. 19010231A http://www.forza-moto.com/en/p/2013+ducati-kit-4-x-driven-plate-th-1-5-for-race-clutch...
I got some from a French ebay seller, can't remember who though. Ducati make/made them but local Ducati dealer said they couldn't order them? I...
If you can locate some 1.5mm plain plates, then some careful swapping with 2mm plates you can get the stack height you want.
So a bit under 38mm stack height... ;)
They'd never take me alive anyway... ;)
I wonder if the VAT (or whatever it's called over there) was ever paid? (was it ever sold?) because if it was then surely that's good enough? You...
