Separate names with a comma.
If you don't want wings and just need to tidy the mounting area up, you can get blanking covers. Part number is 97180871AA. They're about £100 but...
It'll be a Marelli. The siemens never went in a 749/999.
I’ve used Dodomat too. Very impressed. Used to it stop the drumming and road noise in my van. Used dynomat over the years on audio installs. Both...
DCPR9E’s here too. Used them for years without any problems.
Prices are all over at the moment. The £30k days are done for a while imo. A quick google and there's a massive spread. One for just under £13k...
I’d put a new seal kit in the master cylinder
Brand new, never fitted wheel sets, including new discs and Pirelli wet tyres. They are the "base" wheels, not the forged "S" type. £1800 inc. VAT...
No. 749/999 shocks are different lengths. You can use any 748/916/996/998 shock though. If you're not bothered about the "badge", have a look at...
The recall appears to be triggered by the mounting screws coming loose. This allows the composite to crack. The backrests aren’t fitted at the...
From experience, trust me…. If there are multiple options and scenarios, the errors and mistakes will multiply. It seems pretty difficult in some...
The chain tension should never be set on the centre stand. It’ll be way too tight when in use.
Spinning the bobbins has been a trick for years and is ok for a quick clean. Don’t get carried away though, especially if using a drill to spin...
Quite normal tbh. More pronounced when going backwards. All the above would deal with potential issues, but if it's slight and there are no...
What bike and how long was it running? The gurgling could be as simple as an air lock, or it could be getting pressurised which would point at a...
Where you have one line of values per component/fastener, the three figures are nominal/low/high torque figures. The low and high are usually 5%...
They do have their own mechanic. Dave is a pretty capable guy with a lot of experience across the board. Prep and presentation is usually first...
There’s a clip on the plastic moulding, one on each side. You can see them in your picture at 9 and 3 o’clock positions. Squeeze them inwards and...
Not a factory colour scheme. They were either red or white. That looks like a proper paint job, inc. the tank, so likely to be original panels but...
