Separate names with a comma.
Just go for no. 1, why not?
Thus making it more original, as I think that's what Ducati did... :D
If nobody (including Ducati) knows, then does it matter?
All my bikes are modified to some extent. I don't worry about originality, I modify them to suit me which is to make them perform/ride/turn/stop...
I'm sure it would work fine but just keep an eye on the condition, you don't want the bike ingesting bits of it if it starts to break down or come...
I fitted the thicker seal to mine at the same time as fitting a thicker (EVR) airbox. This makes the tank difficult to fit as everything is very...
Spindle for 1098 should be the same as 848, AFAIK other than the Ohlins versions they used the same forks and wheel. As for calipers, as long as...
Indeed, the red reinforcement cord is glass fibre, kevlar is yellow. AFAIK belts don't generally 'break', rather the rubber deteriorates causing...
It is generally considered best practice to increase the rear rather than decrease the front for several reasons, however it is...
Whilst increasing teeth helps with acceleration, it helps more with rideability IMO, I doubt the actual figures, 0-100 or whatever would vary much...
There is a serrated type of washer but it is a 'long' nut and needs to be ferkin' tight so shouldn't be coming undone and definitely not because...
Exactly this happened to mine. Many years back I had the clutch replaced by a dealer as part of an insurance repair. First ride out the clutch...
When fitting car tyres they replace them but they're push-in, cheap and considered disposable. I've never heard of replacing bike valves unless...
Any reason why you're fitting new valve stems?
To calculate the actual torque you applied see; Torque Wrench Extension Calculator Basically; M1 = M2 x L1 / L2 Where: M1 is the torque...
