Separate names with a comma.
I wont be on the way back in fact I'm not coming back tonight [ATTACH] One badly burnt 1098
I will now mainly be drinking Stella on the poop deck of the Pride of Bruges
Could you drill the two holes with increasingly larger drills. Until they are down to the shaft. You would have more control over it than an angle...
I suspect all the above comments were made about Lous Bleriot a !00 years ago
You are correct I am confusing it with the fact that the retaining plate has to be turned so it doesn't line up with the splines but does with the...
Can I just say something There is a groove in the shaft. The splines at the front do not line up with those behind it. So if you do get it moving...
I am sure he has been mentioned on here before and may even be a member or was a member Think he is @kevmoose
I part ex changed a car at a garage for a new one Some time after the new owner sent me a letter asking me to send the tonneau cover to them....
I remember theS4 when it first came out . I fell in love with it and was determined to get one. There was never a "Senna" mentioned. It was always...
748/916/996 have three temp sensors If you look at the bike from the left the there are 2 horizontal ones pointing at you 19&20 on the diagram The...
Yes
You waste your time polishing it out. Also they don't do you for loud cans If they are going after you for your exhaust it's because they are not...
Cured the grinding sound from the back of my Vdub by fitting new brake pads Was a nice ride to Scarborough eurocarparts on the bike to pick them up
I went to RIAT 2019. Last time I went was about 15 years ago its dumbed down a lot. [ATTACH] [ATTACH]
Those on the MV shouldn't really be like that. I had to do that to carry them back to the boat. Normally they are either side of the 20 Try and...
No picture of the bag on a 916 but below is a picture of where I fitted the straps Also they fit the same way on my MV I have a picture of 2...
Mines a single seat but I use a Kreiga 10 or 20 The straps on a bip will fit the same way
Bit late to the party but the reason the Yanks developed a pen was because there was a slim chance the graphite dust from pencil use floating...
I made one from a piece of square bar that worked perfect. I have since fitted a healtech so I could remove the servo on my 1098
The servo does "talk" to the ECU. If you just remove the cables it will show a fault. There are a lot of threads on here of ways to prevent the EML
