Separate names with a comma.
I have noticed that with Motul 300V there is always a thick coating on the cams & rockers when I service my bike - consider that I usually service...
Veered indeed, but I was thinking that maybe a multi also uses head gaskets of some type? I know the SS/Monster doesn't but I still wouldn't be...
That's probably the easy bit, just use a front cylinder camshaft...
Don't know about the Multi but on a 916 you need £100 worth of gaskets to remove/replace the heads, so despite it being a right faff messing with...
If they allow you a certain number of miles then you have that many miles irrespective of whether it reads in km. Give them the (correctly...
Given it's out of warranty then unless it's got any kind of power restriction (French model?) then what does it matter if it's a grey import?...
All the ones I've seen are temp gauges/filler cap. I've got one on my Guzzi, which although a different fitting and longer probe/dipstick is the...
I have Cyclecat adjustable bars although you can't raise much more than 25mm anyway as they will foul the fairing and the angle is also adjustable...
Indeed, however when one is being held up by a string of slow traffic and is wanting to drive significantly faster than said flashing Fiat 127...
And, no matter how fast you are going you will always have some di**head in a car, 3ft behind you with his indicator on and flashing you to get...
I have an Arai RX7 Corsair that's getting on a bit now so I tried an RX7V but the sizing is different. I've had a few RX7 variants up to the...
Not had a chance to look yet as I've been busy this last few days and I'm going on Holiday on Thursday until the middle of August so it will need...
Try Ducati Kamna; Tuning-Teile kaufen und Tuning Tips | Ducati & Aprilia-Tuning Kämna
It's not too bad, the worse part is setting the speedo (unless you have access to a dyno). I found the best way is to fasten a car sat-nav (or...
The intake cam is definitely not right, it's one tooth retarded so the intake valve is opening and closing too late. Hopefully it hasn't caused...
I would also recommend CJS. :thumbsup:
I did some research into this when fitting mine as the 1198 Ohlins do have 15mm offset but as I was using a 916 wheel I needed to source 15mm...
Allens are the people, I've been there a few times times (they're not far from me) and they've always had what I wanted in stock. Very...
Maybe but on mine the Brembo HPK discs are thicker than the originals and only around 1.5-2mm narrower than the caliper cut-out (test fitted...
