Separate names with a comma.
That may help, I've just inserted it into the hole but the angle and direction it sits at makes a difference and it gets a bit hot to hold it. If...
I've got one of the digital versions and the results can vary a bit if the probe's not sitting right in the test port so you do need to take a few...
Nice, but what is it with 'Scrambler' style bikes and brown seats?...
Have you read this? BikeBoy.org - Ducati 900 ENGINES : NOT ALL CREATED EQUAL
They both use the same carbs but as you say jetting is different, 900 intake manifolds are larger bore, so no problems there. Does it have 'V2' or...
Great stuff, I'm watching. :upyeah:
Thanks for the comments John, I'd be interested in seeing your 1100 build... :upyeah:
To update an old thread; Engine now rebuilt, new big-end shells, pistons, cylinders, exhaust valves, valve guides, seats re-ground & heads...
Should all fit, you may have to adjust the linkage lengths and maybe experiment with the spline position of the lever to get the correct lever...
Remove the short lever attached to the gear change output shaft, turn it through 180 degrees and refit the linkage to the lever. Like this;...
Should be some basic maps on there, ideally you want a custom tune. I've just looked back at my notes, I had a PC3 for a while on the 916 and it...
748, 916 & 996 use the same PC3, they will need different maps of course. SP, SPS etc. models maybe different as they have a different ECU?
[IMG]
And your workshop, face, hair, clothes, lungs and inside of your nose...
At £60 it's a bargain. I polished my own on my 916 but it is dirty, messy job and it probably took me around 8 hours all in. I started on the...
If you're checking valves then the belts need, at the very least checking for tension. It only takes a few minutes to take them off/refit and in...
I wouldn't even consider leaving the belt on, how can you get any feel for tightness from turning the engine via the crankshaft?...
I don't know if it's the same on a 1098 but on my 916 I ground away the edges of a 22 ring spanner for this purpose, that way I can hold it still...
If the shim rotates then it's not really tight but how tight is it? After I've set mine (0.05mm closer), to double-check I stick a feeler equal...
