Separate names with a comma.
From the photo that’s a cable operated version so undo the throttle cable housing (2 screws/bolts), disconnect the throttle cable (having made...
The part numbers for ECU on the 1200 and 1200S are identical 28642801A. Therefore if the OBDStar covers the 1200 it will cover the 1200S. The ecu...
No. They’re not linked. You’ll need a diagnostic computer to find out what triggered the EML and extinguish it.
I’m sure the 1200 will cover it as the difference between the S and non S is Ohlins suspension and some other farkles, ecu will be the same.
@afilord hopefully the replacement HT leads sort the problem for you but your symptoms do, IMO, appear to be more due to a fuelling issue. When a...
Did you turn the key on while the fuel sender and fuel pump were disconnected? I'm curious as to how, if that is the cause of the EML, the ECU...
I had this issue once with a MTS950 of similar year. Have you checked all the fuses? I've a feeling the parking lights circuit is distinct from...
The indicators are controlled by the dash not a relay. I can't recall if the original indicators are LED or not (I sold mine a few years back) but...
I can’t vouch for KTM’s black but Simoniz Satin Black works well on Ducati’s black wheels.
Osmosis of what? The fuel from inside the tank to the outside but underneath the paint or the osmosis of moisture in the air, through the paint...
How does one? [ATTACH] I’ve a Moto Guzzi Norge with me at present and as I was going over the bike I noticed all these bubbles under the paint...
Yes, the system has to be drained and both rads removed. One of the reasons the Labour is so much is due to all the stuff that has to be removed...
IMO the disk rotors shouldn’t warp in so few miles. If you use FB there are a few Multi V4S groups out there, search across them and you’ll find...
Once you’ve done this service you’ll probably find that at the next one they’re mostly all in spec still, the valves won’t seat home any further...
This thread came about because @Vader mentioned he’d used AutoGlym Polar Foam and wasn’t overly impressed. I too have used/am using it and I too...
Following on from an exchange in another thread (small bike things) what snow foam do you use and would you recommend it? Also do you use the...
Time for a thread on snow foam :upyeah: https://www.ducatiforum.co.uk/threads/what-snow-foam-do-you-use.98852/
You don’t need to replace the c-rings if they’re not broken but you do need to make sure they go back on the valve stem they came off and the same...
@Treadlighty is correct IME, as the valve wears into its seat and as the c-ring closing shim retainers get ever so slightly squished the entire...
Obviously he’s pushing Gyeon products but this YT vid I found very useful when I first came across it some time ago. [MEDIA]
