Separate names with a comma.
Likewise. Only ridden a Vespa once, about 35yrs ago and what a load of old shit it was with it's tiny wheels and twistgrip gearchange. The old...
I use fibre washers, one on each side of the heatshield - they last fairly well and are dirt cheap on ebay.
Well it's one more, isn't it... ;) [MEDIA]
These claim to really last and work better than anything else, bit pricey though; Lightweight Pro Clutch
Life of Brian is brilliant and probably the funniest (what have the Romans ever done for us eh?). I would also rate the Blues Brothers as a...
The older bikes (Desmoquattro) have alignment marks on the cam pulleys, I understand later models don't? (don't know why?) If this is the case...
You'll also need the pillion pegs, undertray and the bracket that holds the catch on the seat, plus the rider's seat pad on the biposto is...
The rear wheel spacer is fine, I also have around 4-5mm protruding with my Marchesini 10-spoke wheel but, as you say it will sit flush in the...
I've repacked a few sets now and I always wrap the new wadding in aluminium tape, for two reasons; Makes it so much easier to get them back into...
Modern bikes will likely have finer filtration than older models, that said; 'self tapper' - WTF is a self-tapping screw doing on a bike, what...
A screw in the petrol tank (ooer!) won't do any harm, unless it's watch case screw or similar then it's far too big to get into the pump/filter....
I don't know but I think the 600 is essentially a sleeved down 750 and so probably shares the same flywheel?..
I like the MBP valve retainers, combined with Newman rockers. I always dreaded finding 'glitter' on the pickup filter and had to deal with 9...
Having never ridden a BMW boxer twin I would imagine it's mainly down to the higher compression? but BMW may have an even bigger flywheel mass...
Lighter flywheel will give more engine braking, because you don't have the momentum of the flywheel to keep it running on.
Sorry but; [IMG] :D
Because, it's yellow...? :rolleyes:
