Separate names with a comma.
Probably says 'Race Use Only' instead... :rolleyes:
Machine Mart sell the same tool for £12 less... Laser 5341 - Ducati Cam Pulley Removal Tool - Machine Mart
I maybe wrong but I think the cans are the same as the Desmoquattro?
This has been my experience, was with freeserve/wanadoo/orange/EE for years but as soon as EE took over I had connection/drop-out problems (I...
On the one pictured in my above post ('98, 916) it is 15mm centre to centre.
Maybe that's why they make a 20mm? :D But both mine (916 & M900) are 22mm as was an ST2 engine that I had. The OD of the threads on a 22mm...
Slick 50/STP does leave a sticky/slippery coating on engine parts but then so does a good oil, like Motul 300v. I don't know whether it's good or...
That's because all the crap is in the adjoining 'car & other stuff' garage...
[img]
Sounds like the spring is too stiff...
Do you mean sag? if so then to get more sag you need less pre-load on the spring i.e. back off the adjusters.
Agreed, I've never had any problems with 'old-fashioned' coils on any vehicle but at the last service my car had all it's coils changed...
Since you have a multimeter, check that there is 12v at the wiring that the bulb plugs into.
300g is probably the equivalent weight loss of several hundred pounds worth of replacement titanium bolts. Nice free mod. :upyeah:
Under the circumstances, I'd be buying it back & fixing it myself (unless the claim can be 'unclaimed' and you just take the bike back to fix?)...
Will fit OK but mudguard mount is different. Ohlins are 3mm bigger at the bottom yoke than the Showa (56mm) otherwise straightforward.
The fogging is easy to clean. Headlight dip from left to right is also easily changed - the easiest way being to swap over the beam unit inside...
I don't if yours, being a later model, has headlight relays? Mine didn't and the power simply goes through the switch and (marginal) wiring....
