Separate names with a comma.
Thread is M10 x 1mm. Stainless cap head bolt with crush washer?
Uploaded to here; Download - Hightail ECU diagram is on a separate page from main wiring, HTH.
I have a pdf copy of 998S workshop manual, not the greatest quality but legible and has wiring diagrams. Too large to email but I can upload to a...
Indeed, and if I did try it I think I'd stand on the other side when doing the lifting - he's never going to hold it from there if it goes over...
xx9 wheel will fit. I have 1198 forks on my 916 and am using a 916 wheel, just needs a spacer to replace the speedo drive plus 15mm offset discs....
[IMG]
Got some work there. I'll be watching this with interest, good luck. :upyeah:
Thought it was for rental?... :D
No strap, but there should be a small angle bracket bolted to the frame that sits over the ridge at the rear of the battery. Shame really because...
Motobat MB16AU is a good battery, much more kick than the OEM Yuasa lead acid. I have them on both my M900 and 916 both of which have raised...
I've just been to the garage to look and definitely not. The forks fit (after boring the yoke) and they are the same spacing for the wheel etc....
I would think 45mm would be a good header size. Try contacting Mark at MADASL (he's on here) he may have something suitable and could certainly...
I have 916 Showas in my Monster and had the Monster yokes bored from 50mm to 53mm. Don't know whether the stem fitting is compatible though?
A bit pricey but; OXID eShop 4 | steering head in 'Superbike' version DUCATI 748 - 998 | purchase online
Oops got my slave n' master relationship wrong - Must have a word with the Mrs... :Bag:
But only around £90 from Oberon for a better quality part with a lifetime warranty and that will reduce the clutch pull...
Nice one, a word of advice - if you're using a 916 yoke and have it off the stem then get a hole drilled in it so you can use a headstock paddock...
Indeed, start with the basics - set TPS, throttle balance & CO and see what that does.
I got them from Spareshack who was In Jersey and sold Cyclecat stuff but it was many years ago and they're not in business anymore. Cyclecat...
