Separate names with a comma.
and there were less ‘plain Jane’ 998S released than any of the various Ltd Edition ones (Bayliss, Bostrom, FE, Matrix) so bizarrely the unlimited...
It may be the release for the Hill Hold. HH is, or should be, capable of being released by 2 quick, short, pulls on the front brake lever, a...
Yes:upyeah:
Just waiting for delivery - he says hopefully.
:upyeah: For the gaskets but :( for the studs & bolts they’ll just seize again
Howdy Kev :upyeah::D
I used these A...
Thanks, that’s most kind of you. I’ve a possibility of an unmarked one in red at present but if that falls through I’ll take you up on the offer...
Could you not connect the USB cable supplied with the wireless charger into the USB charging port in the phone holder on the tank?
I’ve seen this loads of times from lots of different people, that Brembo don’t supply service kits and nor do Ducati. Each time the suggestion has...
Great job and well done:upyeah:.
Damaged by a test rider today :(, does anyone have one lurking around please ? [ATTACH]
Then it’s time to strip the fork(s) down and see what’s going on inside There are o-ring seals in there so perhaps one has given up, perhaps the...
Unlikely to have fork oil leak from there as there’s a significant air gap above the oil level and below the fork top. Just a thought but it’s...
and……. How far so far? Have you applied any chain lube at all? Thoughts? I’m going to need a new chain shortly on another bike and am...
Any car body repair shop will be able to fill and spray the fairing panel and the clutch & gear lever are bolt off, bolt on. We’ve all done it...
When is the last time the oil was changed and does it have the correct grade oil in it? What you’re describing sounds like clutch drag due to...
Useful info that, thanks :upyeah:
Ok, I see where you’re coming from now. I’ve just had a quick look but can’t find it but @andyb iirc did a couple of threads on steering geometry...
As Ricky says you can buy spacers or you can use the seat catch off the BP seat but turn it around 180 degrees which should then get it to line up...
