Separate names with a comma.
In that case it should be the M8 x 1.25 as chrisw says. Mine has M10 as I have changed to later braking setup but I looked at the old (916) parts...
Thread is M10 x 1.0, at least the fittings are so I think the bleed nipple is the same.
It looks too thin to get a decent purchase but as long as the pinch bolts are loose enough you may just be able to. You need to remove it for...
Indeed it was, luckily I only rode few miles with it grinding. Got recovered home and hub was salvageable.:upyeah:
Don't buy the one I linked too, because they're cheaper new; Part no. 866.1.018.1A showing as $2.99 on Ducati Omaha on-line store - even allowing...
Like this; [IMG] Actually mine had enough metal left on the eccentric to still work and get the spanner on for adjustment, otherwise you need a...
Here's the piece; Ducati 748 916 996 998 Tail Brake Light Rubber Pad Buffer Wedge Damper Cushion | eBay
See the pic above the light clips onto the bracket and then there is a rubber buffer that 'wedges' between it and the seat unit - no screws.
Assuming a Ducati seat (aftermarket could be different) then the rear light is the same, the only difference is the mounting bracket for the seat...
Always a good turn out of bikes and cars, some really nice Ferrari, Lamborghini etc. usually there.
:Vomit: Somehow, I doubt it. I rather fear whatever the cost, it was/is/will be borne by the UK, 'coz I can't see that Tony/Cherie had anything...
Agreed, and a slimey, self-serving ***t at that. Always worried me when Blair would holiday at one (or more) of Berlusconi's properties, does...
They're all crap. Mine will work OK if I bleed it properly (need the caliper off to do this) but after a couple of months it's crap again. Not...
I made it.
That alloy bracket is the one that Translogic (used to) supply with the dash, it's the same one I'm using on mine. I did intend to replace the 2...
I've used lithium grease (as per the manual) on my 916 spindle threads but I've also used copper grease, can't see it making much difference? As...
But will it be as crafted as my 'custom' spacers... :D
I made my own for the Translogic dash, picks up off the four disc bolts; [img]
Likewise; [IMG] [IMG] :upyeah:
