Separate names with a comma.
Nothing serious then... ;)
Basket is worn but I've seen worse, the one in my 916 for one although it's not burred over like yours but it is a steel basket and yours looks...
I've had both a PC3 and then an ECU remap on my 916. Power was no different but it definitely runs better on the ECU remap, smoother through the...
But less to the fork legs...
Not sure what an idle air valve is, but it sounds like something you could remove and bin to me...
Download - Hightail ;)
You were very lucky that it turned over without a piston/valve interface because that could have been very expensive to sort. I suppose it...
It's called 'character'... :D
That is indeed the cam that will spring one way or the other when trying to fit the belt, you can get a bracket thing that holds it whilst you fit...
It definitely shouldn't be like that, the marks are not spot-on on mine but they're no more than 1/2 tooth out. If there's been any piston to...
Check the small oil seal in the end of the gearbox shaft that the pushrod passes through, as these are prone to leaking especially if the pushrod...
996 has rocker/valve springs similar to the 2v (unless they've been removed?) but the hooked end is not as long or as square as that shown in the...
Not necessarily, I've owned 3 Ducatis and only 1 was (is) red. That said if I was buying a Ferrari I'd want a red one and I'd really like a...
Ducati Servicing and Tuning Specialists - GTEC Performance
Obviously it needs care plus new belts, service, tyres etc. but if the valve clearances were correct when it was built (one would hope so) then...
Yes, unfortunately a cush drive popped out the back and 'milled' the eccentric which is why I dismantled everything to get the aluminium shavings...
Now you can get on with riding it and not worry anymore. :upyeah:
Unless you hold the bike under the footrests with axle stands (or other means) then you need to leave the wheel on as the single-sided paddock...
Circled here; [IMG] Mine leaked after changing the head gaskets due to having the wrong 'O' ring (Newer gaskets are different thickness and so...
