Separate names with a comma.
Whilst Petsmith is correct in what he says above, the simplest method is to merely hold them all together in your hand, exert some pressure and...
Can you see and measure the spring compressing as you turn it?
You’d be surprised (well, you’ve found out now) how quickly a tracker can drain the battery. Once the battery falls below a certain voltage,...
When I did mine (non R) there were 2 measurements in the workshop manual; one was the volume (450ml iirc but please check for yourself as I may...
Thanks for the copy & paste @Carr01 :upyeah:. That article was created to assist all, it would be nice if a link could go into this place as well...
Thanks Derek, it perhaps wasn’t the best choice of words by me:confused: Naturally the voltage ‘to/from’ the battery has to be equal, it was more...
Don’t know them. I used RS paints for a frame touch up (748) and for a spray can for the fairing but, as said a few posts above, ended up taking...
Both exhausts will dump into a collector box before splitting again so it’s not as straightforward as horizontal cylinder = right hand exhaust for...
A question. Surely the way you’ve wired in the voltmeter will only tell you the output voltage from the battery through the bike’s circuits, not...
I don’t think they’re Termi. The ends look wrong as does the carbon fibre :thinkingface:
A euphemism Mark, to save me having to delve into, Weight transfer, Friction coefficients (of brake pads to discs and tyres to road), Disk surface...
I just ask the questions as the rear brake on my 2009 1100S is fine, not earth shattering but enough to lock the rear wheel, and that’s a similar...
:joy::joy: and there was me thinking it was an Oirish flag what eith the name Datboi and all. My bad. I’ve no experience of the Italian Police.
Small world. We live in Schull and Mrs P comes from Kilfinane, about 20 mins from Mitchelstown. Once the panicdemic has passed (if ever :() please...
Ah, I didn’t know that. Thanks.
Try this FB group https://www.facebook.com/groups/834643140048807/?ref=share Or this one https://www.facebook.com/groups/183416959613227/?ref=share
If you swap the pegs over from side to side or turn them over when mounting them won’t the forward push of a foot tighten the peg?...
I agree with Bradders :upyeah: if your max travel is 160mm then your ideal Rider Sag is 53mm. You’re just 5mm out. Increase the preload to reduce...
How rubbish is rubbish? Have you ever tried to brake on a loose road surface with just the rear brake (in a straight line)? Can you lock the wheel...
@comfysofa fitted one to his HyperMotard, it’ll be a similar layout, iirc there’s a thread in here sbout it, search for that. edit: here you go...
