Separate names with a comma.
Not on radial calipers...
If they really are for 748R then they would fit but I would double check the offset first as many sellers don't know the difference (witness the...
On my Marchesini wheel the lip on the right side is too small to work with a spacer - the disc would not be on the wheel, only bolted to the...
I used the normal torque but you'd probably get away with less. The magnet is stronger than the original part though.
I have 15mm discs on my 916, looked at spacers but they wouldn't work on my wheels (disc not centered by wheel, only the bolts). These should be...
I have one of these; https://tpoparts.com/cat093/index.php?route=product/product&path=1_51&product_id=11
You can do it without a stand if you do one leg at a time....
As a 'youth' I went to many gigs, I even did an 800 mile round trip on a Ducati 250 Scrambler to see Led Zeppelin. :upyeah: Later on family life...
:upyeah:
As above, for MOT if it has a pillion seat it needs footpegs (and also a chainguard). Obviously single seaters don't need them and the...
Paint has held up fine, I didn't use any lacquer. Not sure if the colour match is perfect? but as I painted the whole thing it doesn't matter to...
Might be tough with the engine in the frame, access is not great. I had the 'luxury' of removing a tight filter from an engine on the bench and it...
I've got a homemade one you can borrow and fairly local to you. :wink:
I wanted something similar as the Ohlins yoke on my 916 has a huge hole in the bottom. I found that a suitable sized 1/2" drive socket pushed on...
1098/848/1198 front end will fit but if you get the Ohlins then you'll need a bigger bottom yoke (can bore the smaller) as they're 56mm rather...
Threads in mine are perfect. :upyeah: Although being a Monster there are no bolts in them...
If they're the ones that thread into the sides of the front cylinder then yes, M10 x 1.5 ('standard' M10).
Good point, and a good thing it's not a Hein Gericke voucher...
Indeed they have a big range of pads for top, sides, cheeks etc. Most Arai dealers should have them (not cheap though), checkout; Arai Interiors &...
