Separate names with a comma.
For a Desmoquattro you'll want 'bent' ones - fold the end so that you have about 20mm sticking out at around 45 degrees to make it easier to get...
BMW had big problems with their 6 cyl 2.5L (and others) apparently the sulphur content in certain fuels was eroding the Nikasil? I had a 1996...
Here's a pic of a broken one - you can see how the screw tightens the mirror into the socket; [ATTACH]
Undo the retaining screw underneath (through the hole) a little to release the ball joint and it will pop out.
That's the solenoid.
Test that the starter switch circuit 'closes' (circuit makes between the 2 wires) but also check the small connector in the back of the solenoid...
There are more than 2 wires in there, in fact there are 4. They 'split' around the handlebar so 2 go to the starter and 2 to the kill switch, if...
5mm.
The one pictured is from a '97 ST2 and is the same as those on a '95 M900, don't know if the 600/750 use the same but I would think they do. The...
Thread is 8mm x 1.0mm (fine), length of threaded part is 18mm, although only 15mm is actually threaded. The shaft that the thread is on is 13mm...
I've got a couple of spares; 22mm long x 24mm diameter.
I don't know on the 999 but have you removed all the belt guards etc? On a 916 you can get the heads off in the frame, no problem but the belt...
Well done. :upyeah: Maybe, one day they'll even admit that Desmoquattro rockers flake for no apparent reason... :rolleyes:
Worried that your teeth will be stained after a heavy night drinking red wine? Simply drink a bottle of white wine before going to bed, to...
In 1980 (yes, I'm that old) I rode from Florence, Italy to Zurich, Switzerland (and back) on a 1969 Ducati 250 Scrambler, to see Led Zeppelin in...
Likewise.
Interesting... :upyeah:
I had one for tuning the SU carbs on a Spitfire, I'm sure I've still got it somewhere but I've not seen it since the early 80's. Not sure what...
Snap-on make metric versions, both 14 and 15mm; FRDHM15, Torque Adaptor, Metric, 15 mm, 12-Point
In that case 5 bar is way too low, about half of what it should be and definitely in need of attention.
