Separate names with a comma.
ST4 cooler is a different shape (curved) and looks (and fits) quite different so not a straight swap. Of course anything can be made to fit if you...
If you remove the cylinders you can see a lot of the insides and it's not that big a job, don't even need to remove the engine from the frame....
That oil cooler will fit an 900SS or a M900 as they both use the same cooler, however the oil lines are too short for a Monster so I'm guessing...
Just popped out for some milk? :eek: That's some serious rideout...
The third one that I sent you has threaded fittings in it, presumably to fit the cooler or bolt to the fairing on an ST2, you might be able to...
Sounds good to me, at the Esso petrol station on the corner of Leicester Road and Dalby road (A607 & B6047) at 9:00 then onto Mkt H etc. :upyeah:...
Not sure which cans you've got but I recently repacked the Termis on my Monster and I'm fairly certain the strap on one end would be...
Welcome :upyeah: I also lived in Marlow for a while, many years ago.
Not got the full set but I've got 2 plain ones if that helps.
Some say that if you buff them hard enough that writing wears off... :wink:
Il Duce?
:eek: I wouldn't use a Scotchlok connector on anything, let alone a Ducati ECU or anything automotive. You're asking for trouble (broken wires,...
I think it should be OK just don't ride it without. :eek:
Top yoke? if so probably can just change it without any support.
Sounds like it's running lean. I would get the TPS, throttle balance and CO settings checked.
Sounds like a plan, as you say time TBC depending on who, where what, when etc. :upyeah:
Just resting...
Anyone going? http://www.thesharnbrookhotel.com/events/eventDetail.cfm?eventId=49
Ride height and sag are two different things. If your sag is wrong adjusting the ride height won't help.
Clay kitten shooting
