Separate names with a comma.
Lintel
Until you investigate further you won't really know, you say the walls are 650mm wide which indicates an old building, if so its most likely a...
The chip is in the ecu, there's a large rubber bung on the top, remove it and the chip is underneath. Steve
A flat ring spanner from the rear brake side of the bike to loosen it, then with fingers from the chain side to fully remove works for me. Steve
Battered
The second one, supplied and fitted by the garage.
Chiz if the 748 is a two wire switch, they are quite sensative to the distance a different size washer normally cures it.
Ian, the early 748/916 two wire switch is a switch which works when the plunger is raised by a bump on the selector drum, the 998 is the single...
You saying they don't wash down south.
Yep just watching, what a pleasant surprise to have it on Quest.
Has anyone actually seen an Easter egg? There's plenty of chocolate eggs but none that say easter on them.
Iv been building a wall in the garden, I've had enough now. Steve
Just found one of my original levers, it has the adjuster just like my aftermarket one's. [ATTACH] Steve Ps have you sorted the problem yet.
A coalition government for years to come.
Work
Thanks Denzil I fully understand what you're saying but the whole throttle body is in the air box they're normally under the air box on the 748...
Not a chance without removing the rear sprocket, luckily I have a Renthal quick release fitted.
It's a bigger job than you think, slacken the chain, remove rear sprocket to give enough play in the chain to remove the front sprocket and then...
Hows that, must never rely on other people's work. [ATTACH] Steve
Well spotted, it's never been off before, it's the first new chain and sprocket it's had while I've had the bike and i just put it back as it was,...
