Separate names with a comma.
Thanks. Mine is a multistrada 1200s 2010 so il need the 7mm
I live in London. Anyone who knows a good UK website to order it? One last question. When you remount the camshafts on the top of the shims, then...
thanks man, it was only a lazy copy and paste from the website, hence the bold font. no one is shouting here :)
JMP valve shim measuring tool 7mm
But how can the shim be bigger than what's written on the side of it? should if anything be smaller? this is what I've used...
Thanks everyone for your replies. I also thought the tool is not super accurate. I'm using a veneer and a micrometer. How a shim can become bigger...
I'm doing a desmo at 43k. Shall I replace it?
Hello everyone. I've finally opened the engine today and removed the camshafts. Those are the measurements I've got. In same cases what's written...
Ok. What I'm gonna do is to aim for all the closers to be 0.07 and all the openers 0.15. Any more information is welcomed.
I've updated the reading to the correct ones. thanks for your replies. I'm thinking cause I've opened the bike so much by now, if i lift the...
What do you aim for when setting the correct clearance? For openers do you aim for 0.13 or 0.18 and for closer do you go for 0.05 or 0.10? thanks
[ATTACH] Hello everyone and thanks in advance if anyone can help. I have measure the clearance today and I would like to have some confirmation...
Hello everyone. Just a questions that is buzzing in my mind lately. I own a MTS 2010s, and I have recently discovered that in Enduro mode the abs...
I think it must be the pipe because you can see petrol from the middle to the bottom part, while the top is totally dry.
No luck, But I've found those at a fraction of the 260£......
[MEDIA] Went to get the bike yesterday to find out it was leaking petrol. It seems to be coming from the little pipe that I have marked in...
I'm pretty practical with tools.
Finally, does anyone know of is worth putting a bleeding nipple into the abs unit for the front brakes too?
Just to update on this... https://ibb.co/8DtGktQ [IMG] [IMG] [IMG] I installed a bleed nipple on the abs unit. Mounted Brembo sintered pads. Bled...
Thanks everyone. I bled my brake and still doesn't work. I'm gonna try reverse bleeding this time. Also I would like to add some bleeding nipple...
