Separate names with a comma.
Nik Which lights did you buy. I'm looking for something discrete/small. Prepared to buy cheap Chinese on eBay and modify if I need to as don't...
If it is still under warranty I suggested just uncoupling the cable and living with error message until you get it back to dealer. Just take the...
Disconnect the cable and open the valve.
I had the exact same issue. Thought it was a misfire but turned out to be exhaust valve. No error messages on dash about exhaust. Valve wasn't...
My 2012 S model started to leak on RH side. I (wrongly as it turned out) blamed the reliability of the bike (I've had my fair share of issues). To...
As per ducati.ms, it is possible but would need a bespoke micro processor as an adapter. That wouldn't be hard as the 2010-12 canbus messages are...
So it was stiff but not seized (assume shop freed it up a bit). I have removed the disc from the spindle and left everything else in place for the...
MD Racing in Walton have just diagnosed it as a siezed exhaust valve. It had stuck briefly a couple of months ago but I hadn't thought anything...
Just to confirm, the JST connectors I mentioned above are the correct ones, both for the USB (2 pin) and Ohlins forks (4 pin). Finding the Ohlins...
My 2012 single spark seems to have developed a misfire. Starts at about 6-7k rpm and is far worse under load. Havent been using it much recently...
Your offer will no doubt be the most practical solution. I needed one for my forks a spent quite a while trying to work out what they were so...
Or try this if you only want one ( but you are as cheap buying 5 from CPC) Ducati Indicator Turn Signal White Sealed Male / Female Connector
Sorry. Doing it from my phone so links are a bit fiddly. These are male and female connector shells. You will also need the pins. On the desktop...
The connector is a JST JWPF series. As mentioned the half you need is already on the bike and just needs splicing. If you want to buy spares CPC...
I was also paranoid about having lost oil, I'd never changed fork oil myself so had no idea how much was in there. All I can say is don't worry....
I did (seal doctor - bought it especially), made no difference, although I initially thought it had.
so at 3 years old and about 8000 miles the RH fork seal has given up (just one of a very long list of issues over the 3 years !). Bought new seals...
Mine go straight on. Take a few firm thumps, but to be honest that is rather reassuring. Rubbers aren't worn at all. May be I have 'the knack' but...
I fitted HID dip beam. 35watt from HID50.com. Very helpful chap. Considered HID main, but HIDs are crap for illuminating quickly, I.e. momentary...
Me please, pm on its way
