Separate names with a comma.
Can you please ask them when they are going to produce a road going bike that they haven't beaten with an ugly stick? A la the current...
Yeah, I have heard similar stories. The guy I bought it from has a mate in Oz who has done well over 100k on an ST4! My gear lever spring is weak...
It can be a weird one, yes. I had a VFR800 that was the single most unreliable bike I've ever had. But I have a 20 year old Kawasaki sports bike...
Indeed, I called into the mechanic today to leave in the other head and the inlet rockers I had acquired. He showed me the old inlet rockers and...
BTW, for anyone who does their own maintenance, I found that all four pulley bearings were fucked. However they are standard SKF items that I was...
Sorted! Got an old 8mm Allen key and a good hacksaw and managed to cut it to fit. It did take a while and doubt the blade will be much use again...
Have just found a suitable allen key to cut and got a decent hacksaw blade, so I'll try that. I will use a good adjustable spanner on the end of...
OK, should have started with a pic really. [img] The vertical head needs to come off to facilitate the fitting of the new inlet rockers....
Thanks for the suggestions. I do have blow lamp, and I reckon I'll have to change the bearings anyway, so it may be the only option. But I am...
After a fraying belt hopped a tooth on the exhaust cam on the horizontal cylinder on my ST4s, I was lucky to get away with just some bent exhaust...
Honda NT400K reversed over by bread truck!, Another one stolen and recovered by cops only to be lost by them! ZZR600 smidsied. No Ducati's lost,...
I once encountered a guy in a supermarket car park, while I was astride my all year round ST4s, who was riding a clearly well used 999 with a...
@Nelly: Indeed, it was not a severe collision, as it was low gear and road speed, and I got it clutched immediately. Good point on the shells...
I'd have to agree that the Diavel would be preferable to the Multi but in saying that it is a bit like deciding which nut you'd prefer to lose to...
Well, the tear down went poretty well, I managed to get the thing out by removing just the airbox, the throttle assembley, the rad and the oil and...
That is not my cup of tea. That is all. A
How did you test the coils? I found on my ST4s that the horizontal cylinder coil went a few years ago, and it manifested with occasional oruning...
While it does just drop dead when it hits the rev limiter, the electrics should not cut out. There is definietly something up there. I'd say you...
After a belt issue, I think my piston has clattered valves in the horizontal cylinder. There is almost no compression on the cylinder. I am going...
Well, the worst was confirmed last night. Vertical cylinder reads good, compression was about the 150psi mark on a not particularly accurate...
