Separate names with a comma.
Am borrowing a moto specific one that has the small diameter connector. Should be good. A
@Derek: Thanks for that mate, I ahve a compression tester on the way for that very reason, good call. @Nelly: The veritcal cylinder is all lined...
When I retnesioned, as per the Hz tech note, I tensioned to 90Hz for used belts on a four valve head. The belts were on for a year and looked in...
@Dukedesmo: Gotcha mate. That is indeed the case. I adjusted the pulley clockwise on the eccentric, as that is the intuitive thing to do. Arse...
OK, not what is meant here when saying the correct direction for the tensioner pulley? None of the procedures I have seen have indicated that it...
That's a good point, a compression check should indicate if there's anything further amiss. Cheers, A
I had retensioned the belts in March, about 3000 miles ago when I was fitting a new oil pressure swith due to a leak. I took off the covers to...
I was heading out this morning and had just warmed the bike a little, when I was tipping into a roundabout at low RPM. Nothing more than 4k or so...
Sorry mate, no idea, but I'd be interested to know if you find out. A
I went down me local breaker and got a set of bar ends from a ZZR1100. One 8mm drill and a counter sink tool brought the entire haul to the...
If the fan cuts in and out, irrespective of what is displayed on the dash it will be fine. Not sure if it is the same for the 2 valvers, but on...
I can send you a how-to document that had pics and all, and here is a link to a good youtube video of a 916 getting a belt change too. Ducati 916...
No, that's a fair point. However, belts under tension are very different from belts at a rest on shelf. The job a belt does on a bike, is usually...
The determining factor here seems to be usage. If a bike is used regularly and not left standing for more than a week or two at a time, the...
Thansk chaps. Would love to get a pillion seat cover for mine, but never saw one for sale. A
Aren't the longer service intervals just a result of a chnage in the valve collets, after an aftermarket design concept, that means that the valve...
Eh, no. These all have an electronic speedo that reeds from a pick up that counts the teeth going past on a gear wheel. If your rev counter is...
Hmm, having just rolled over 42k miles on 2002 ST4s, I can't agree with the reliability comment. Cracking bikes all, but horses for courses! A
I had a similar problem and did all of the above, as in sprocket, throttle bodies sync'ed etc. Then I went to an independent guy and he checked it...
I say, Laz old bean, where dya get that wonderful pillion seat cover? A
