Separate names with a comma.
well its running really well now, and its got a very stable tickover... dry clutch always sounds like a bag of spanners through! here is a short...
On the last couple of builds where I have converted from EFI to carbs I have used an Ignitech ignition unit that utilised the original induction...
Still in the middle of a build of a multistrada special when a bike i have always wanted came up at a bargain price… an early Ducati Monster. With...
started work on the seat base. I have cut it to shape and added the Rivinuts to hold it on. I have used aluminum ones as these are much easier to...
been painting the tank and seat today... one of the tips I picked up many years ago is that when spraying small items, use a torch in your other...
Back in its wheels now... [img] [img] [img]
Thanks! One of the benefits of having a blast cabinet is the ability to clean parts up easily... But I have always struggled to get that nice...
More progress... no holidays, and no pressure to go out means more garage time... its a good job I have this project or I would be climbing the...
no problem! glad I could help! I used mine again recently, been building a 1000DS engine! the puller is strategically placed to hide the...
Now for the nice bit… putting it all back together! the frame came back from the powder coaters and as ever its a superb job! I know its a 50 mile...
undecided on the colour at the moment... still some time to decide! One of the things I have always struggled to get done is plating... I have...
Lockdown is good for progress! I have finished the frame modifications to clear the carbs, and finished the fabrication on the rear subframe so...
Today I made up some cables for the FCR’s. as they are split I have used a cable junction box, and made up the cables from scratch, including the...
Next the messy job of making a seat, well I actually made two as I couldn’t decide on shape! Its the one thing many people ask how I do it, so I...
here is the subframe i have been making the last few days… I have deliberately kept it short as this will be a short single seat, which is the...
Been working on making the manifolds from scratch… it’s been quite difficult to get the shape and angles right, while maintaining approximately...
June 2020. I normally build bikes over the winter months... but with Corvid -19 we are not going on any holidays or getting out much so my wife...
Been out and about the last few days bedding things in after the rebuild... one thing I noticed was its slow to turn over when you start it. I had...
that would make a very nice project... I used an ignitech which is virtually plug and play onto the coils and existing crank position sensor. If...
I used the gates App... but others give identical readings. if you have flouresent lights, turn them off as the 50Hz they emit can skew the...
