Separate names with a comma.
Right that's the strip down finished! Probably will be a while now till I post again as the engine rebuild all hangs in the balance waiting on...
I need to remove the bearings out of the cam end and also the brass insert in the clutch casing. What kind of tools do I need to complete this...
Great info guys, it's as tight as hell so now I will swing off the spanner :-)
Tying to remove the threaded mounting for the oil filter, does anyone know if it's a left or right hand thread? [ATTACH]
Left school at 16 with nothing, did an apprenticeship in fabrication and became a skilled plater. Six years in the industry then made redundant,...
Also Peter Hickman posted a picture of his engine he had coated, I got the company name and they priced around £400 to coat the whole engine .....
Finally removed both inspection windows (pain in the arse) also removed the main clutch oil seal.. Now struggling to remove this seal and the...
My plan for next week is to strip down the heads and valves, on the videos ive watched they use special tools for the shims and also a slide...
great news Paul
Didn't realise it was as simple as that lol prepping the cases by removing that and the bearings ready to be coated Jamie
Any tips on how to remove the inspection window? [ATTACH] [ATTACH]
So had a good go on the engine today and finally finished stripping her. Next job is to try and remove the bearings, not sure whether to get a...
Bought a 8mm triple square from ebay, thankfully worked first time [ATTACH]
I have used the wifes hairdryer with great success on breaking the red loctite grip, much to her delight
Amazing uplifting easy watching TV, roll on season 4
Cheers all for the tips and tricks, I've ignored it all week so will drag myself in there tomorrow night to try and unfuck it haha Until then it...
like clingfilm? will give it a try. just bough an 8mm triple square, will give that a blast and if all else fails then it's the easy out!
The finish line was in sight today but was abruptly halted due to a rounded Allen bolt.. I have trieda torx but no luck so back to the drawing...
All outer parts removed, the engine is now ready to be split.. Plan is to clean both sides, remove all bearings and send them off to be coated....
Great info, will look out for one.. Hopefully get it split this weekend if I can find a time slot :-( J
