Separate names with a comma.
Here is the engine finished. I have welded some lugs on the sides of the inlet manifolds so they can be bolted together. the rod sticking out...
while the frame is away I have cleaned up the carbs and fitted the Dynojet springs and needles which were for a Monster 900... However the jets...
here is the frame with all the modifications finished and welded, ready to go off to the powder coaters. Over the years I have used many… some...
a little bit more progress... I am almost to the stage where I can take it all apart and have the frame powder coated. I have decided its going...
Sure, most early ignitions were set with the ignition advance fixed, then came automatic advance and retard, which were mechanical devices with...
I don't have to do it as I am not using an ECU, just carbs and a basic electronic ignition, although that will be 3D with a TPS on the carbs....
yes, changing the clocks does affect the immobiliser unfortunately. However, there is free software out there where you can switch it off in the...
I think they end at Photoshop! but you can get the idea [img]
some more pictures... the seat came back from the trimmers, I was very pleased with the results, and its comfortable for me which is the...
I will probably leave them silver as thats the colour the frame will probably end up....
been a little while as I am having to take a break to do some house DIY… but I managed to sneak in the garage and make a cover for the front of...
jobs for today has been to put the seat foam on the aluminium tray and sand it to shape before sending it off to the trimmer. I was able to sit...
been busy the last few days making the speedo housing and mounting the headlight. I am using one of the digital rev counter and speedo's. this...
I know what you mean, and in many ways agree! I have spent ages looking at the seat, and in the early stages I did several designs in the foam......
there has been a bit more progress over the last few days...I have mounted the battery under the tank, and put the coils and solenoid on the...
a little bit more progress, been away a few days so not too much! the seat is more or less finished and is placed on the bike. I turned my...
early on while i was thinking about how I wanted the bike to look, I had a vision of a bit “Old Skhool” and decided I wanted a round headlight,...
I have finished tacking up the rear now and finally pleased with the result. Decided on rose joints rather than the home made ones... the frame...
One of the reasons I got the tank cheap on Ebay was it had been welded on a seam in the past… it was a poor repair using MIG and had leaked, so I...
A bit more progress... I have decided to go for pod filters, took the easy option! I have finished the the tank blanking plate, save for putting...
