Separate names with a comma.
Haha... That's no help at all ;)
I'm about to connect my fiat 3 pin obd cable for the first time to my 1098 and have previously been told to check polarity so i won't burn the...
The immobiliser ring sits inside the OEM rubber cover and the ring is much larger than the ignition. I ended up taping the ring to the carbon...
Hello Just got a fullsix carbon key cover for my 1098 discovering there are no slot for the immobiliser ring. How do you set it or do you just...
A "case saver" which have been mentioned before could have possibly reduced the damage. I've googled but never found one for our bikes which you...
Thanks, the clutch now feels and look good. At least at standstill with engine off. Sunday is test start day. Just got to button up the wiring and...
I didn't bleed the top valve next to the leaver I knew i missed something stupid
Yes, all was fine until i put the slave on. With no salve and with complete clutch on everything was spinning freely. When you pull the clutch...
Here is the final part of jb weld and new cover on. Im having some problems with my new ducabike alu clutch and ducabike 30 mm slave. I was in a...
It's the world famous magic epoxy. I've used it alot with great result for many years. Never in an engine tough so this is the first time. Like...
Thanks to both of you for the tip, will do. I keep you posted.
Alright, i was prepared for people saying I've used to much. I will then add a couple of layers will waiting for a new alternator cover. Once I...
First jb weld was a total failure. Tried to heat it so it would go in to the crack. Which it did, about 0.1 mm. Next i tried to open it with a...
Another thing. How would you guys go about doing the jb weld? Would you like i previously wrote drill a hole at the end and cut a valley in the...
Thanks. I will give a go and document my failure ;)
There is plenty pass the crack. This is one of the short bolts for the cover which should be tourqed to 10 NM.
Thanks for the reply. I've been talking to a few different welders. All but one said no, won't touch it. My biggest concern with welding is that...
Anyone know which material is used for the case other than aluminum? The welder is asking
You're right. It's for the alternator cover behind the salve. Total crap. I need to find a welder. Thanks for quick response.
Finally got the parts to start working on the bike and found horrors. The crack is inside the case we're the slave is bolting up. What would you...
