Separate names with a comma.
Maybe Mr Mcsporan can answer that. Long time ago since I was there, not the kind of place you go on holiday!
I'm in Thailand Wally. I also worked in Angola for 10 years.
Welcome Jock from another Jock
Got to be atleast 50 fasteners in this kit working out at less than £1 a fastener. any colour your heart desires too. Fairing Bolt Kit Ducati...
Totally in agreement, but you have to be really sensible.
Oil shear is the reduction of its viscosity over time. Turbos, oil pumps, cams shafts, gear boxes etc all contribute to an oils shear. Have a...
Whatever oil you decide to use the important factor is knowing when that oil has lost its lubricating properties and is no longer protecting your...
Good point, so what about Turbos on 95% of today's Diesel engines. Some Turbos spin up to 280,000 RPM, a typical TD Car around 150,000RPM, I would...
A long(ish) read but worth it. See if you arrive at the same conclusions as I did at the end of the article with regards to oil in your...
Awesome so no chance of me forgetting to torque my sump bolt up then!
Take all your panels off, fuel tank off, airbox, throttle bodies and refit everything......I always have spare screws. Use them for the one that...
We are talking about one plastic filler cap, one oil filter and one sump plug?!? I put Mobil1 Delvac Diesel Engine Oil in all my bikes - great...
[IMG] You need the cruise control only kit (319AUS$) plus the additional nudge button (79AUS$). However you've thrown a spanner into the works...
There are 3 trim files provided that were tuned without the CAT fitted- Termi Full, Termi Short and MIVV. When you flash your ECU load all 3 of...
Now I know my fuelling is going to be good I've just ordered the Quickshifter. There are discounted offers at Tuneboy at the moment.
So I got out with the laptop strapped to the tank for a couple of hours. With the target screen open and roll on selected I proceeded to...
My mobile Dyno setup....(couldn't find a bigger laptop!) [MEDIA] [IMG][IMG][IMG][IMG][IMG][IMG]
I had the full MIVV and decat system fitted. I could never get it tuned properly and maps made it difficult to start. The bike never ran quite...
Many thanks for this, very informative document.
Gents, I have just stripped down my forks to replace seals. After assembly and oil fill without the spring, damper needle rod and cap installed...
