Separate names with a comma.
Bought one of these four years ago and cost £150 new now cost £166 new or is there something different about this one. I’m sure they’re all...
As fitted to my monster also and required for easy starting. Saying that I know of many with monsters that don’t touch it. Monster 1000 (2004) but...
Pretty much what I’ve done in the past having access to creo (pro eng) . May as well use someone else’s hard work if freely available . Don’t have...
Don’t know if it helps but i dowloaded a 900ss cafe racer in step and viewed in my software. It’s 212Meg from grab cab. Here a pic. [ATTACH]
I know of many with 749 and 999s that had the cutting out problem but I can say I’ve never experienced this problem on my 1098 and have ridden...
I have a 1098s purchased new in 2007. Fantastic bike approaching 60k. Posted a thread couple of years ago when I discovered the bottom skirt of...
Think that should be the other way round. Before ABS on Harleys they used dot5 which is silicon based.
Here’s my 1098 horizontal cylinder belt for comparison. Obviously not the same bike but belts have plenty of spacing. [ATTACH] .
The pic I’ve shown is taken from a Ducati service manual for a monster S2R 2006. My monster is a m1000 2004 and was inserted as per your seal....
Had the same problem with my monster. Here’s the pic. As fitted was the other way round and PIA to remove. [ATTACH]
And they are. https://www.part-box.com/arp-m8-x-1-25-x-40-12pt-ss-bolts-771-1005?search=771-1005&description=true
Have sets of several makes of both hex and TORX but not really the point I’m trying to make. Again just my observation from my experience and...
Hi Derek, Yip and purchase my TORX stainless fasteners from Westfield fasteners. Have a full range.
Probably but that needs more thought. Just playing around with software.
Totally agree but not available in wide range if sizes.
Whilst sitting bored - still in lockdown in Scotland I thought I would think more about something raised in another thread regarding preference...
Exact opposite for me.
Slightly old thread but thought I’d mention replacing my Brembo Calliper M8x1.25pitchx40mm bolts on my Monster 1000 with titanium TORX head bolts....
Just goes to show difference. Like yourself owned from new taken delivery June 2007 and mine was fitted with a YT12-bs which required the spacer...
thanks for that. Looking at the parts numbers they changed the part for the holder after 2007. The last digit after 2007 change from 1 to 2. As...
