Separate names with a comma.
Three weeks from placing order. Showed several mates and it really is a stunning piece of work and all from a flat piece of ally. Over the moon...
Before I comment I have no links with this company but feel he deserves some recognition for outstanding work. After some 10 years trying to...
Used ARP fasteners for other things. Presently making a set of stainless nuts for the heads on my monster from stainless bolts with a 14mm flanged...
Unfortunately very common with Ducati - well at least mine? Anyway it’s starting to delaminate from the casing as aluminium oxide if formed under...
I use this guy for xpel ultimum plus film. https://ardetailing.com He’s just moved to new premises in Hillington just around the corner from...
Used probolt, Middleton stainless and Westfield fasteners. I’ve pretty much stuck with Westfield. For me they offer a great range in A2,A4 and...
Met Gizmo and Linzi on many occasions at the early stages of Ducati up North and the start of the Scottish Ducati Club with several meets at...
Nice work.
Thanks for that. She’s now running great probably better than new. Fires into life on the first press, smooth throughout the Rev range, smooth...
Think the important part is the engine mount if tailored to engine lower profile for neat fit. The rest is box sections, supports , wheels and...
Think it’s this - not cheap? [ATTACH]
Quite a good idea. Basically a modified paddock stand or buy at cheap one. Fairly straightforward and structurally secure. Change the feet...
Just checked my 1098. It’s possible to remove the front bolt and re torque but in the case of the rear bolt the sprocket gets in the way however...
Don’t have a monster 1200 but a 1098 single sider And as you say not possible to get a hex socket in but it should be possible to extract the two...
Basically three conditions for failure of coils. 1. Open circuit 2. Complete short 3. Insulation breakdown between several windings resulting in...
Buy pretty much all my fasteners from Westfield especially torx head and reasonably priced. Good company to deal with.
Used arp stainless bolts for high tensile applications which have a tensile strength of 170,000 psi which equates to 1170N/mm2. They’re are an...
Here’s a useful response on Ducati.ms if it helps. As the guy says it’s a fairly simple circuit with very few components and assuming the meter is...
Should help to check motor out. Here’s the chip and some data....
If you now someone with a lathe simply cut off the thread of your existing bolt and drill/tap the remaining head. This then gives you the...
