Separate names with a comma.
I have a spare line that i bought but don't need. I can check the part number - are you in UK?
Congratulations :) and good (?) to see Ducati Mechanicca have not lost all of their quirky cussedness
Every now and again the light flywheel makes it hard to get over compression. When i first owned my 1200 I stalled it twice when riding gently and...
loverly bike :upyeah:and ahead of its time in many places - Don't mention the worm drive :confounded:- but it will give you something to do !
modern monster seems very weather proof - apart from the :mad: swing arm pivot :mad: Mind you the 1200 is a bit lairey for slipsy for wet traffic...
Bad news Tazbert I will keep my eyes open for your bike - but i never saw you before - you must move too fast :D
On mine (Monster 1200) the pivot was held by stiff gummed grease - there was pitting corrosion on the pin but it had not increased the diameter of...
Hi Keith Thanks for the offer, it is all back together and I will be ordering a tyre with some grooves in tomorrow. On the Monster I can only...
I agree that regreasing the swing arm pivot needs to be a yearly job :( Anyway the bearing grease that I had on my shelf had a peak operating...
Greases for the swing arm pivot? Looking for technical criticism of this thinking :) The pitting that i found on the swing arm pivot looks like...
Thank you Bumkin I had seen that article regarding the MTS swinger and was expecting to see that hole. But it turns out the M1200 swinger is...
So it seems that the corrosion is probably electrolytic between the pivot and the crankcase and between the pivot and the inner race of the...
The pivot tube had signs of a dark dry grease on it but was very pitted especially on the middle and chain sides [ATTACH]
The Impact driver was needed to start it moving the first 15mm but I was able to use a 1/2 socket and brace for most of the extraction
Well i just got the swing arm pivot out! I used the cap nut to pull it out I started with a 2mm steel spacer (cut from a BSA spark plug spanner...
Good luck
dirt inside the eccentric adjuster clamp There was about 3 tablespoons of mud and sand inside he swing arm up against the eccentric Pictures 1) &...
Tools (2) hex key for swing arm caps 24mm hex sockets [ATTACH]
Tools (1) circlip pliers for hub removal I found it very hard to find the right size circlip pliers because each manufacturer seems to quote...
Thanks for the suggestions I also need to cut more pipe spacers so I can pull the spindle through and if that fails buy 2 of these [ATTACH]
