Separate names with a comma.
Finished the lower mudguard mount today, ended up making a bit of a boss to (a) support the arm of the mount & (b) to spread the load as I had to...
Started mounting the rear mudguard today. Managed to get the middle mounts tacked in place & the rear stays tacked together along with the...
The rear master cylinder arrived the other day so I got that mounted today. I've just tacked the bracket in position & I'll get my mate to do the...
Marked the frame down-tube out for the steering damper bracket & then removed the forks so that I could drill the two holes for the threaded...
I'd have to agree with Cookster, although the lure of a "basket case" may seem attractive due to it's cheapness, it's clearly opening a whole can...
My spark plug connectors arrived this morning so I fitted them, whiled away ten minutes in the garage !! [ATTACH] Just need to connect the other...
Got the oil catch tank mounting bracket finished today & fitted. I know the bike doesn't really need it, but as I had it anyway & I'd used the...
What repairs are needed on the frame ? I take it the 916 you've been offered is already recorded as a CAT N ? If it's not recorded already as a...
I was going to suggest the grease gun method, as someone has already suggested. It NEVER fails & more importantly is safe, unlike compressed air...
When you say damaged/repairable, what exactly need repairing on the frame ? The VIN numbers are surely stamped on the frame so what you'd be...
While I was rooting around for something I found this air filter that I'd bought for the other bike, but never used so I'll use it for this one....
The simple answer is "no" ! & yes, they are slippery ! ;) However, having said that it has crossed my mind to maybe look at possibly using a pair...
Got a working gear lever now. There's just a temporary support fitted between the motor-plate & the carbon cover, which the gear lever shaft...
Got the primary drive cover cut out, mounting washers made & the footrest fitted today. Just the gear lever to do now, that needs some more...
The oil pump fittings, blanks, gauge & pressure switch are now installed. [ATTACH] I then removed the original carb support bracket as it gets...
I've re-positioned some of the engine oil pump fittings this morning to suit my oil hose routes & other things. Below is the engine as it came,...
Not sure if it's worth trying, but could another option be welding a nut on to the stud & getting a long spanner on it. You'd need to heat the...
Collected my engine yesterday from the dealer. Got in un-packed & up on my bench after a bit of struggling, it's heavy !! :astonished: [ATTACH]...
That's very kind of you, but it's not all me I have to say, there are some what I would call really talented craftsmen who've had a hand in this...
Got the steering damper mounting bracket finished off today, it's already for welding in position now. Also made a couple of positioning jigs, one...
