Separate names with a comma.
Sadly only one is mine...i need a white frame 900 to keep it company .
[ATTACH]
glass bead for the top ends,depending how badly the corrosion is,you need to tape everything up you dont wont blasting,i left the covers bolted on...
keep a eye on the pipework,its suprising how much movement you get on a on bracketed can which stresses the pipework untll it fractures.
my mate who is a painter came to see me today,he has started using hi temp ceramic paint,too late for me but its worth looking at,i steam cleaned...
i think suzuki gs650 plates fit,have a look in the supersport section there is a thread on it.
is there any reason why you only put cans on he right side and not both sides? personally i would run a bracket to the back of the rearset.....im...
I forgot the piston ring compressor....it can be a tricky job if you dont have 3 hands so i made this from some thin alloy sheet and a couple of...
For the engine case i just made one out of a piece of alloy bar drill and tapped for center bolt to draw it off,i used a impact wrench to undo all...
Is it as bad as mine was?[ATTACH]
A leaking tank is no problem,mine was in right state inside,and leaking,i cleaned the inside the best i could brazed a patch on the bottom and...
Mine was in the same condition,i rescued it from a damp garage in glasgow where it stood for 12 years....a bit of powder coat and paint on the...
yes all that was done before the vibration started.......got it rebuilt over the weekend and test rode it tonight,problem solved,shes running...
The chain and sprockets are good the chain was adjusted and oiled,it managed 40 miles or so before it started,i will also change the bearing in...
nothing much to see but i will double check every thing before it goes back together,just waiting for the gaskets,in the mean time i have just had...
they are allready in my mind for next time,a full kit.
got my leg lifted for one...£23 ouch!!
Yes its the same as yours mate,apart from the outer cover is black instead of silver,i had a fair bit of juggling about as the shaft is 20mm...
Engine is out..the only way to satisfy my self is a strip down.
New wheel bearings.
