Separate names with a comma.
stripped carbs again,inspected with a magnifying glass,float height 12.5 13mm..valve tip no wear and the seat was good,o ring on the seat...
The TT2 had a weekend away at SPA for there big classic weekend...it performed faultlessly.
extreme caution warming the carbs,if you have a bar of hand soap rub a line of soap on the carbs and if it turns black your close to melting them.
i was going to cure it in the oven but i was in too much of a rush,hopefully it will be ok when ....if it ever runs.
Correct...i will set the float height then get a fuel level measure with a plastic tube for future ref,i will also pressurise the float bowl to...
Cheers Al,round 2 tonight...i also found the thread on using a clear plastic tube on the overflow,i have used that method but you still need a...
i do tank repairs (welding) if you dont wont to use sealer.
you will struggle top find titanium sleeves,if you find any let me no,how badly damaged is yours??? pic
A Few lessons today,The unions i bought yesterday are the wrong size,i found out PJ1 paint is not petrol resistant,any technical info you...
got ready for a fire up and the carbs started pissing,stripped them down and they were spotless,wot should the float height be? everything seems...
ah...possibly why mine seems a bit short,i have run it down the left,the hose was kinked so it looked like that was where it had been.
cheers,i can see your fuel lines bonus,the tank breather and battery run on the right side on mine,i have found a pic of that,i was having trouble...
can anyone point me in the right direction for fuel pipe route from tank to carbs,also the carb breathers,choke cable and clutch hose,thanks.
found a replacement swingarm at the right price,seal kit in the clutch master cylinder,and a few other jobs,the oil cooler is a tight squeeze but...
Its starting to look like a bike again,with a bit of luck it might be running tomoro,the swingarm is a bit tatty i will keep my eye out for a...
just orderd some hacksaw blades.
finally got the dry conversion finished,i was led to belive all dry clutch primary gears are the same....not,i had to swap and change 4 sets today...
good advice thanks,i have replaced them with OE but the engine will be coming out in winter for porting etc so i will be fitting MBP collets.
I stripped my 750 heads down at the weekend and measured some of the biggest closing clearances in Ducati history......12 and 14 thou and two of...
Im hoping to get the engine rebuilt tonight,[ATTACH] [ATTACH] [ATTACH] i have finished polishing the exhausts and the fairing bracket is done
