Separate names with a comma.
It might be luck of the draw. My '02 748 has 71,000 km on original rockers and they look perfect still.
Being a 2002 like mine, you shouldn't have any problems with flaking rockers. If you pick it up remember this bike has the different heads and...
Timing belts should be replaced every 3 years or 10k km/6k miles on my opinion but rarely give trouble of not changed for some time longer. It's...
It is a nice pressure plate and will replace the stock grey one if you want a little bling. I would keep the other stuff as spares. Did it come...
There will be a market for them. If I was local I would buy some and fix/paint them myself
Last time I bought a fuel pump o-ring I got a 6 pack. I have never been able to save one but try every time.
Lots of riders trail brake with knee down. I think it depends on the tyre as well how big the strips are. You definitely want some margin
You need the chrome plated steel fittings. I've pulled my tank about 10 times in the last few years and they are still as good as the day I fitted...
Are you converting the bike to a full-time race bike or just going to a track day now and again? What you can do is make up some covers that go...
Excellent. Good work
Chris, I converted my 2002 748 into an 853. I used 916 cylinders from a monster s4 but any 916 cylinders will do,. The only difference is where...
My 2002 748 has VIN ZDMH300AA2Bxxxxxx
Try: https://www.ducati.ms/threads/ducati-vins-decoded.27112/ Or https://en.vindecoder.pl/
The good bit with this stand is that it doesn't have a handle out the back that can take up room in a tight garage as Roadtrip said
They will fit. I would go this route to solve the problem
Ideally you want all 3 locks to be the same key. Might be able to use the internals from the Chinese locks in the genuine part.
I think you'll find that all engine cases have a finish/paint on them. The sand cast cases may look bare but I don't think they are
Zero Gravity also make good screens. I bought a cheap Chinese clear screen recently though and kept my good one safe. Also consider a new set of...
something like this - the pushrod? https://www.gothamcycles.com/ducati-clutch-lever-pushrod-and-barrel-748998-monster-ss.html
What's the difference between a base 996 and a 996S? Is it the camshaft profile? If so you can easily take off a cam cover and check the...
