Separate names with a comma.
Stating the obvious.... Your hose it too big. What ID is the old plastic hose? I bet it's 1/4 or 6mm and your rubber hose is 8mm or 5/16 which is...
It's the way Ti sheet looks when it's new of the roller. I don't know of a way to replicate that. Vapour blasting the sleeves would give a uniform...
I had a Sunbeam with a very similar issue. I found the throttle slide to be slightly worn allowing too much air past. Fixing that improved matters...
￡11.24 20%OFF | CNC Reverse Shifter Gear Shift Lever Peg For Ducati Monster 748 916 996 998 SuperSport 620SS 750SS 800SS 900SS 1000SS ST2 T3 T4...
The fuse is there to protect the circuit. So it depends on the wires. If they are thick enough you can up the fuse. Here is a guide for flexible...
I changed the fuse holder on my 916. It looks the same but is slightly different to the OEM as it has standard spade connectors. Makes it quite...
It's easy to check but I guarantee the problem is the thermistor in the tank. To check, disconnect the 4 pin plug at the bottom of the tank (best...
I would suggest your brake pedal hasn't got any free play and is leaning on the pushrod ever so slightly. When it all gets hot the master cylinder...
I can also make them in Silver now. Will be hallmarked 800 as per the original.[ATTACH]
They have ripped off lots of people on the MV Agusta forum. This was some time ago but they still advertise magnesium swing arms for thousands of...
You only need a bit from pump to filter and then from filter to outlet. The vent pipes don't seem to get affected by the ethanol and they are...
You need about 30cm
[ATTACH] [ATTACH] That worked out well. Now I have to do one in silver! [ATTACH]
Thank you kindly Sir.
I have seen it, not much help to the chap who needs a Senna plaque :D
I'm working on a replacement plaque for a Senna. Anybody else interested if I can pull it off? Either to preserve the original or replace a lost...
