Separate names with a comma.
This leak is a common problem, I know of at least 2 others, my dealer had mine replaced through Ducati goodwill, just had to pay for the labour....
Yes it certainly does :upyeah:
I have the speedo angels anti-glare fitted to my 2018 1260 since new, 27000 miles later it has become crazed and now needs replacing, probably go...
Erm, wasn't suggesting it was from the radiator but possibly from the oil cooler which sits in the beak! Be interested to know where it does...
Pretty sure, part 12, switch assy. oil pressure, takes the same connector that's in your photo!!;) [ATTACH]
That looks like a connector from a sensor, maybe the outside temperature sensor, or oil pressure sensor :thinkingface:
Always feels like it's going to break :( but to release push black part down pinch grey outer ring and pull black part up, should come out if...
If it's the same as the left side, you just need to release a plastic locating peg which clips into the underside of the handlebar between the...
PM sent.
For the ultimate look, a nice set of BST carbon fibre wheels ;)
The box is definitely transferable between all models, not so sure that the mounting rails are though, so well worth checking with a dealer.
You may well find you get a slightly different reading with the bike on its wheels on level ground and upright, as per the handbook I believe.
This is where I have mine mounted: [ATTACH]
I've been running my GT2's as per Ducati recommendation, ride and tyre wear have been excellent both solo and 2 up, mileage is far better than...
T Had been considering these also, presumably the bolts are longer than the originals but the bolt heads must also be taller and / or wider,...
Can certainly recommend a BSD gearbox Dean.
That would explain it cheers, think mine has a 102 chain fitted, so yes must be a bit longer than the BST one .
Looks beautiful, great job and write up. I'm surprised you didn't need to change brake hose though, I fitted an SF swingarm to my 1198 and had to...
Thanks for that Andy.
Thanks Andy, I'll be in touch :upyeah:. Any recommendations for aftermarket sintered plates?
