Separate names with a comma.
I think that was me. I can't remember what I suggested but I'll check it out.
Me too.
I'm not a big fan of the popping and banging either. I fitted a Termi system with the upmap to my Supersport 939. Which although louder, as I...
If you are sure that the idle control valve is working as it should the you will have to look elsewhere. Other possible causes could be the engine...
It is an electrically operated servo valve. At ignition switch on you should hear it move to the cold start position. They are known to sometimes...
Thanks Paul, I hadn't noticed that. Autocorrect can be a right PIA.
[ATTACH] It's possible that the idea control valve is stuck. Item ii in this pic from the parts list
I think it's a case of try it and see. The 600 Pantah has quoted bore and stroke of 80mm x 57.8mm. The 600SS is quoted as 80mm x 58mm so they might.
The Darmah uses a very similar wiring as the Pantah which because of the routing of the supply from the battery going through the fusebox main...
I think it might be item 21 in this pic. [ATTACH]
I can't find it the parts list but it screws in to side of the engine and the other end fits into the grommet at the bottom of the battery tray.
Looks like corrosion in the terminal has caused resistance creating heat, melting the wire insulation and damaging the connector. 12 way Molex...
It depends on what kind of keys you have. Here are the instructions for the red and black keys. If you have these you could remove the transponder...
I'm fairly certain that it will.
I've had issues with the tendons of my left hand for a number of years. The best thing I did was to change to clutchless gear shifting. Changing...
I'm not sure why it was 3 terminals in the output connectors. I'd think the centre one is redundant. This shows the normal connections. [ATTACH]
I've no idea if a washer is used or if there is room for one under the nut but a Nordlock washer may be worth considering.
I don't stand and bend over. I crouch on one knee beside the bike and pull it towards me using the frame. I never found any difficulty with the...
I usually do this by putting the bike on the side stand, holding the front brake on with my right hand and pulling the bike towards me with my...
The cracked window is in the reservoir section so is out with the pressure system. It will have no effect on the operation. The odds are that...
