Separate names with a comma.
As I understand it, min rate is 60 fpm and max is 120 rpm. Aim to get between these figures engine on or off.
As Guillaume says. But a further check, after unplugging the connector to the loom, bridge the 2 terminals in the connector. Switch on the...
The neutral light, oil pressure light and fuel warning light are all supplied from the same so worth checking the fuses if none of these are...
I had to select the type of Scrambler for this post but it could probably apply to any Scrambler. For anyone who has messages about FUEL on the...
Neutral switch
If the crank journals aren't too badly damaged they can be reground assuming Ducati produces under size bearing shells, which they probably don't....
I fitted one to my Supersport with no issues. It stopped the annoying popping and banging on the overrun when the revs dropped below 2,500 rpm....
If it is LED then it probably is a sealed unit. LEDs are very susceptible to poor contacts though so worth checking all connections.
If Ducati won't sell them to you measure them up and get some from a bearing supplier. Ask for them in viton,
The MPB retainers are their alternative to the OEM half rings. Supposed to be better at keeping clearances in spec for much longer. They must be...
Because the 1098 parts list only shows them as part of the connector, but they are available separately if you know what to look for.
The 0-rings are available in a pack of 10 for £5.88 + VAT. Part no. 88641181A
I think that if you've been reading our posts above you will see that it doesn't matter. Whichever fits best with the lay of the hoses.
