Separate names with a comma.
Yes it looks the same. Kyaba forks. As I recall it didn't need a lot of effort to unscrew. I had mine apart to fit Andreanni cartridges.
Checking parts lists the Hyperstrada and Scrambler forks appear to be the same, at least on the base models, although the lengths may differ.
They look very similar to the forks on the Scramblers. On the LH leg I found that after removing the cap nut I was able to use a pair of long...
If you use a Mac XLD does the same thing. I converted all my CDs to MP3s a couple of years ago.
I've used tool on my Supersport 939 which has the same engine as the Hyper 939 with no problem.
Which models? Could the thread on your tool have got damaged?
I have same tool and have used it for years with no problems. Only time was on a 900ie that was very tight. I think someone had previously damaged...
It does matter but I can't remember off the top of my head. But If it doesn't want to fire up when you put them on swap them round and try again.
I've always used long nosed pliers with no issues. Get a good grip, a sharp tug and its out.
I don't know if Cox and Turner can supply rings to fit but no harm in asking.
Have a look on here for piston rings : https://www.sd-tec.de/en/piston-rings-accessories/
The ECU is grounded through a ring terminal attached to one of it's fixing screws.The ring terminal has a black wire to ground.
As long as it's stamped with the correct number and the old frame is destroyed I don't see a problem. You will have find a friendly dealer with...
b. Do I have to replace my ignition or something stupid because of the key chip immobilizer? You can get a 2nd hand ECU refreshed to remove the...
I think it's an IAW59 or 5A ECU. There are 2 connectors. From memory you need to unclip the toggle fastener and unwind the tape at the cable...
I can't remember which ECU is fitted to the Monster, but yes it should be possible. Be careful how you open it, you might find a lot of corrosion...
At switch on the ECU will energise the fuel pump relay for about 2-3 seconds the switch off. If the pump hasn't primed within this time then it's...
I created these colour diagrams from the factory b/w ones back in 2007. They seem to be available all over the world now with some chancers...
Aye, I was surprised at such a basic mistake from you Mike :)
There should be the same 12v at each injector, the coils and the fuel pump. They are all supplied from the same relay. The injectors are fired by...
