Separate names with a comma.
The older bikes, like the OP's, have a switch with a spade connector and 10mm x 1mm pitch thread. It is the same as used on many VWs. Later bikes...
I do electrical work for a local bike shop and most of it involves fixing charging faults, usually regulators but sometimes stators too, and...
See my reply in the other thread about pickup wiring.
I didn't use anything special for heatshrink, something like this. I can't see heat being an issue as I wouldn't expect the oil to get much hotter...
Not going to guess but I doubt it has anything to do with the Sprint filter.
Fair enough guys. If Nelly says so then I'm sure that's right. The mod does reduce a lot of the racket though and stops the plates and drum...
I have to disagree. The knocking is caused by the tabs on the friction plates moving back and forward in the slots in the drum. The more wear on...
Do a search on the "Quiet clutch mod".
It as 2-way Junior Power Timer female connector. You can get them from Polevolt.
Ooh! Not so nice. I hope you are successful.
This was mine : Before [IMG] After [IMG] I was left with very short lengths to solder to at the pickups but as an electronics technician I...
As I said above Dellorto parts are all available. You should have no trouble getting new slides.
The stator winding resistance will be very low about 1Ω or less and very difficult to measure accurately with most meters. Importantly check that...
@nelly can be found at http://cornerspeed.co.uk/
If you can get all the jets out the carbs can probably be restored with the help of an ultrasonic cleaner with a carb cleaning fluid. All parts...
The A might stand for Accelerator pumps. D is Destra (italian for Right) and S is Sinistra (Italian for Left).
Doug Lofgren has been tuning Ducatis for years. I first heard of him about 20 years ago when I had a carbed 900SS. He used to have website but I...
The headlight on my 500SL was original and was 7".[ATTACH]
I have a 907ie on which the starter had always been sluggish. I fitted a new set of brushes but they made no difference. Later that year the...
True, the higher test voltages of a Megger will show up any insulation weakness but there is only around 12V going into it from the battery.
