Separate names with a comma.
You don't see heat settings on the dash until it has been enabled - unless your bike has had it done already.
I had the Ducati heated grips on my MTS. I have them on my Scrambler and on my Supersport 939. Yes they are pricey but they work well and there is...
These are exactly the symptoms that my 2010 MTS suffered from at 21,000 miles. It was the result of pinhole in the head casting from the water...
JPdiag should show real time values of the TPS and also all the sensors. Can you see these? Do they all seem normal?
Is the JPdiag showing any DTC errors?
The ENI Agip Spezial Permanent coolant that Ducati are currently recommending is almost impossible to obtain in the UK. Looking up the ENI spec...
Even if you turn the crank all you have to is line up the dot on the bottom pulley with the line on the engine cover to re-establish the timing.
Have a read of this article and follow it exactly. http://www.bikeboy.org/ducati4vthrottleb.html
I had mine ceramic coated inside and out so I know for definite. I can't be sure for the later models though.
The silencing in the full Termi system is all in the end can which is a straight through absorption type. There is nothing in the link section....
I had fancied fitting bar risers to the Supersport to slightly improve the already very good ergonomics but was bit put off by the £80 price being...
I'm aware of that Pete. I can understand why there is an increase in perceived risk if there is a bigger percentage of accidents or thefts in a...
Undoubtedly but they are much more expensive. That said, because they are precision made they will need changing far less often.
Admiral may or may not be increasing premiums due to speed awareness courses but what they are doing is increasing premiums of drivers involved in...
Good advice there Nelly. I find the same thing with half-rings but mainly it seems to affect the old 2V engines with 8mm valves stems and as you...
The 'checking' clearances is what they should be set to when adjusting them. The 'operation' clearances is the tolerance allowed before adjustment...
UPDATE: The injectors are Siemens - DEKA
For nothing more recent than the 1*98/848 unfortunately.
We have the Ducati part numbers, it's the Bosch part numbers for the 1200 he needs. I suspect he will be able to source them cheaper from a Bosch...
Does anyone know the Bosch part numbers for the injectors on the 1200 Monster and Supersport 939 or Monster 821 models? Or does anyone know where...
