Separate names with a comma.
Yes, I thought you might know him. Sadly I never met the man.
See also "Some Unusual Engines" by LJK Setright. Remember him @Pete1950 ? It seems my copy might be quite valuable now.
I can see that there would be complications in the drive to the camshafts. It sounds like a model aero engine with a cable operated...
This is the engine I was thinking of earlier, conceived by the, alas, now defunct Saab. Interesting Engines: Saab’s Variable Compression Engine –...
A tip for you. Once you have pushed down the closing rocker, slip a 10mm or 3/8" Allen key between the far end of the rocker and the base of the...
If you have a warranty use it. A new one costs about £160. Back in 2012 a friends late light suffered similar symptoms on the way to WDW. When he...
It strikes me that bearing at B, at the top of the conrod (7) would be subject to a lot of stress from a heavy loading and a high speed...
But an Austrian vignette is only about £4 for 10 days. In Switzerland you have to buy a years worth for about £30. I've been through Austria 4...
This actually quite a serious concern and it's high time Ducati sorted it out.
For the '95 900SS that I used to own the frame number in the log book was just the 6 digit number from the end. The ZDM900 part was completely...
Yes, BUT if the bike is an SS you have to take most of the bike apart to get the rear head off.
I have to disagree. I thought mine sounded horribly strangled with the baffle in and other riders commented on it. I tried drilling a 12mm hole in...
Good to hear you got it done with no problems. Mine hasn't got a centre stand - I forgot about that, sorry. The left over bit is the baffle for...
Other possible options here Walbro Motorcycle Fuel Pumps (In-Tank) - Walbro Fuel Pumps / Hi Fuel Pumps (In Tank) | Walbro, Facet, Weber, Dellorto...
The brown wires to the coils should show +12V with the ignition on and the kill switch to Run. There should be a 2 pin connector at the RH side of...
It is over-temperature protected so presumably it shuts off if it gets too hot but I wouldn't have thought that it would shut off long enough for...
Maybe, but I'd be a bit concerned about the 11.8 figure. The battery voltage should never be that low with a working system.
If you need to get into the exh valve servo, the easiest way is to remove the side panels at each side of the seat then loosen the 4 bolts...
There is nothing to it. Remove the belly pan sections. Undo the bolt holding the strap to the pillion hanger. Remove the spring holding the...
The spring pushes a lever with a roller on the end of it against the selector drum so that is falls into the detents at each gear position. It...
