Separate names with a comma.
Can be tricky to remove and a long time fitted won't help, one reason not to use any sealant as that definitely won't help. Best to loosen...
Mine are the same and, they are the originals that were on the cans from new.
As you can see, the belts will run very close to each other if tensioned the wrong way. Mine's had the heads skimmed by 1mm, (to increase the CR)...
23nm sounds high for a 6mm nut? Would have thought about half (maybe 10nm?) but, I would just go with the feel personally. Edited to add; above...
If you're interested, download workshop manual here; https://we.tl/t-9uKUUvw7Bz?
No sealant needed, I've removed mine many a time and never had a leak. Can't see any torque figures in the manual (tighten 'till it strips then...
Indeed, reprimand accepted but, if it's any defence?... only on the rear. :blush: But actually, that disc on the 916 does seem to work better...
Doubt there's anything available off the shelf, so to speak as all that era used a mechanical speedo. I have a digital dash on my Monster and I...
IIRC, the reason for the larger flow oil pump on the DS motors is because it uses plain bearings for the camshafts rather than conventional...
As above, the oilway size is likely to be different. I fitted a 1000DS oil pump to my M900 for increased oil flow and the outlet port on the DS...
Bastid mice, we get them in the house when the weather's cold. I've been round with cement, filling in all the possible entry points (old stone...
Acculign.
Looks like it could be like mine, a Ducati performance high screen (though mine is clear), pretty much the same shape as the original just a...
Cable ties work well too.
But you'd do better by replacing the single cables with heavier gauge, neater to boot.
Indeed, in the box of bits I had from you. Wondered what it was for...
And a small weight reduction to boot... :upyeah:
Indeed, I ran my 916 with just 4 springs for a good few years and never had any slippage. That, combined with a larger slave cylinder meant the...
Especially when the engine paint flakes...
Early models would have had 3-spoke wheels in gold/bronze to match the frame, I think they changed to grey around 1999/2000? Not sure on the...
